Product details

Powerhouse performance in stereo or mono.

Whether you're recording studio vocals or stereo drum overheads, the LCT 640 TS is up to the task.
Watch the video to learn why it's the most capable solid state microphone in our lineup.

Dual Output Mode
One mic, two channels.

Stereo recording can be time-consuming and difficult to set up, but with the LCT 640 TS you can record perfect, in-phase stereo with a single microphone.
The signals from the front and back of the LCT 640 capsule can output on two separate channels, making it adaptable to not just solo vocals but also wide open rooms and even choirs. 

More freedom and flexibility.

The LCT 640 TS gives you all the control you'll ever need from a microphone.
* Five different polar patterns help you adapt your microphone to any source.
* A switchable pad can attenuate up to -18dB for even the loudest performances.
* A generous four-step roll off filter can attenuate up to 150 Hz to reduce low-end rumble and room noise.
* The included POLARIZER plug-in lets you get creative by adjusting polar patterns in your DAW.

Features

• 1" multi-pattern studio microphone
• Full, crisp, and well-balanced sound
• Revolutionary Dual Output Mode
• POLARIZER plugin to create any pattern after the fact
• Stereo capabilities

Specifications

• Type
  Condenser, externally polarized
• Acoustical operating principle
  Pressure gradient transducer
• Diaphragm
  3 micron gold sputtered Mylar
• Transducer Ø
  25.4 mm, 1 in
• Polar pattern
  Dual Output Mode: create any polar pattern in post-production / Multi-Pattern Mode: Omni, wide cardioid,  cardioid, supercardioid, figure-8
• Frequency range
  20 ... 20,000 Hz
• Sensitivity
  31.4 mV/Pa, -30.1 dBV/Pa
• Self-noise
  10 dB (A)
• Max. SPL for 0.5 % THD
  134 dBSPL, 0 dB attenuation
• Signal / noise ratio
  84 dB (A)
• Dynamic range
  124 dB (A)
• Attenuation
   0 dB
  -6 dB
  -12 dB
  -18 dB
• Low-cut filter
  linear 
  40 Hz (12 dB/oct)
  80 Hz (12 dB/oct)
  160 Hz (6 dB/oct)
• Internal impedance
  110 Ω
• Supply voltage
  48 V ± 4 V
• Current consumption
  5.1 mA 
• Microphone enclosure
  Zinc die cast
• Connector
  Gold plated 3-pin XLR + Mini 3-pin XLR
• Microphone dimensions
  158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
• Microphone net weight
  425 g, 14.9  oz