Adam Audio A7V Near Field Studio Monitor (Single)

Product details

The A7V is a contemporary 2-way monitor that represents the evolution of ADAM Audio’s award winning A7X. It features a 7” Multi-Layer Mineral woofer and rotatable X-ART tweeter, which is made by hand in Berlin.

DSP-based voicing, equalization and room correction options can be controlled remotely and in real time via the free-to-download A Control software, and updatable firmware allows for new filters and tunings to be implemented over the lifetime of the monitor.

EXPLORE THE TECHNOLOGY

ADAM Audio monitors have earned a worldwide reputation for the innovations that we have established in the field of loudspeaker technology. Here you can explore the technology of the A7V.

DON'T SWEAT IT.

A 5 year warranty is standard across our entire product portfolio, allowing you to work without worrying about your gear.

Specifications

• General Data
  Display: Front panel multi-colour LED
  Cabinet Design: Dual front ported
  Cabinet Material: Vinyl wrapped MDF and painted MDF front panel
  Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8)
  Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 W
  AC Input Voltage: 100 – 240 V, 50/60 Hz
  Power Rating: 300 W max.
  Operating Conditions:-10° C to +40° C (+14° F to +104° F); <75 % RH, non-condensing
  Weight: 8.7 kg (19 lb 3 oz)
  Dimensions (Height x Width x Depth): 337 mm x 200 mm x 280 mm (13 1/4″ x 7 7/8″ x 11″)
  Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
  Delivery Contents: A7V loudspeaker, power cable, Quick Start Guide
• Audio Input Connectors
  Analog: XLR, RCA
  Input Impedance: 9 kOhm / 3.3 kOhm
  Max. Input Level: +19 dBu
• Amplification
  Woofer
  Amplifier Type: PWM
  Peak (10% THD, limiter deactivated): 110 W
  RMS (1% THD, limiter deactivated): 90 W
  Tweeter
  Amplifier Type: Class A/B
  Peak (10% THD, limiter deactivated): 20 W
  RMS (1% THD, limiter deactivated): 15 W
• Control Options [via Network]
  Networking Connector: RJ45
  Connection Type: Ethernet
  Communication Protocol: OCA using standard IP data
  Control Software: A Control (Windows and MacOS available)
  Room Adaption Options: Backplate, Extended, Sonarworks SoundID Reference integration
  Advanced Room Adaptation: 6 x PEQ, Level, Delay
  Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference
• Acoustics
  Frequency Response @ -3 dB: 44 Hz – 41 kHz
  Frequency Response @ -6 dB: 40 Hz – 45 kHz
  Crossover Frequencies: 2.8 kHz
  Max. peak SPL per speaker at 1 m (sine bursts): 105 dB SPL
  Max. peak SPL per speaker at 1 m (IEC-weighted noise): 113 dB SPL
  Max SPL in full space at 1 m with sine bursts (average 100 Hz to 6 kHz) @ 3% THD (RMS): 105 dB SPL
  Max SPL in full space at 1 m with sine bursts (average 100 Hz to 6 kHz) @ 3% THD (Peak): 108 dB SPL
  Max SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (RMS): 95 dB SPL
  Max SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (Peak): 98 dB SPL
  Dolby DARDT max SPL in full space: 115 dB SPL
  Dolby DARDT max SPL in full space (bass managed): 119 dB SPL
• Drivers
  Woofer
  Basket Diameter: 7″
  Voice Coil Diameter: 1.3″ (33 mm)
  Cone Material: MLM
  Tweeter
  Type: X-ART
  Diaphragm Area: 4 inch² (2420 mm²)
  Equivalent Diaphragm Diameter: 2″ (56 mm)
  Velocity Transform Ratio: 4 to 1
  Diaphragm Weight: 0.17 g
  Waveguide: HPS (rotatable)
  Waveguide Dispersion: 120° horizontal, 70° vertical
• Signal Processing
  AD converter: 24-bit
  Internal sample rate: 96 kHz
  Delay range, resolution: 0 – 10 ms, 0.1 ms
  Protection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters
• Control Options [via Backplate]
  Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting
  Level: -12 dB to +12 dB
  Input Selection: Balanced, unbalanced
  Voicings: Pure, UNR
  Room Adaption:
  Bass: +2, 0, -2, -4 dB
  Desk: 0, -2, -4 dB
  Presence: +1, 0, -1 dB
  Treble: +1.5, 0, -1.5 dB